Unleash the Power of Network Analysis with Wireshark and Installation Guide

Wire-shark

Are you tired of dealing with slow internet speeds, network crashes, or mysterious security breaches? Say hello to Wireshark, the free and open-source network analysis tool that will change the way you look at your network.

A strong tool that enables real-time network traffic capture and analysis is called Wireshark. You may debug network problems, keep an eye on network performance, and even find network intrusions with Wireshark. Wireshark has something to offer everyone, regardless of your level of experience as a network administrator or where you are in your career.

Here are some of Wireshark’s salient characteristics:

1. Wide-ranging network protocol support, including TCP, UDP, HTTP, DNS, and others
2. An easy-to-use interface that makes it simple to record and examine network traffic
3. powerful filtering choices that let you concentrate on the traffic that’s most important
4. Views and colour schemes that can be changed to easily identify significant traffic patterns
5. Support for plugins and add-ons that enable you to increase Wireshark’s functionality

WireShark Installation

Step 1: Open the Terminal

The first step is to open the terminal on your Linux distribution. You can usually find this by searching for “Terminal” in your applications.

Step 2: Update Your Package List

Before you install Wireshark, you’ll want to make sure your package list is up to date. Type in the following command to update your package list:

sudo apt-get update

Step 3: Install Wireshark

Next, type in the following command to install Wireshark:

sudo apt-get install wireshark

You will be given the option to enable packet capture for non-superusers throughout the installation procedure. Choose “Yes” and press Enter to allow non-superusers to record packets. If not, choose “No.”

Step 4: Launch Wireshark

After the installation is finished, use the following command to launch Wireshark:

sudo wireshark

You can start capturing and analyzing network traffic after Wireshark has started.

Step 5: Analyze Your Network Traffic

You can now begin capturing and analyzing your network data after installing Wireshark. Wireshark offers something to offer for everyone, whether you’re troubleshooting network problems, monitoring network performance, or spotting network breaches.

Wireshark is a strong tool that can enable you to fully utilize your network, in conclusion. You can use Wireshark to examine your network traffic like an expert by following these easy installation instructions.

Real Time Examples

Figures show a real-world example of how the applications operate.

Figure 1 : Select mode of Capturing packets

Figure 2 : Packets Captured when i use internet

Figure 3 : Type of Protocol Used and Header Analysis

Figure 4 :Discovering Source and Destination Port Number and IP addresses

Figure 5 : Discovering Source and Destination MAC Addresses

“Thank you For Reading this Post will see you soon in Next Post ,Readers.”